2018-2019 Mazda 6 – the new generation of the 2018-2019 Mazda 6 luxury sedan

At the Moscow International Automobile Salon (MIAS-), the official premiere of the new generation 2018-2019 Mazda 6. The car is model year has changed significantly and has received a number of technical innovations, among which is aimed at reducing fuel consumption SKYACTIV technology. The design of the third generation 2018-2019 Mazda 6 is subject to the concept of ¬ęKODO – Soul of Motion ‘, and innovation in general, quite successfully challenges the popular opinion today that the Japanese surrender their position in automotive design.

New 2018-2019 Mazda in June – Exterior Design

Appearance 2018-2019 Mazda in June has turned out stylish and attractive. The basis for the design of a new generation of “six” was demonstrated at the Tokyo show in , the concept 2018-2019 Mazda Thackery and the roots of “KODO” go to the prototype shown earlier Minagi and even earlier – 2018-2019 Mazda Shinare . The front of the new 2018-2019 Mazda 6 sedan with large, rounded arches visually widens the car and lights endow six Japanese piercing, hypnotic eyes.

The grille in the style of 2018-2019 Mazda CX-5 adds elegance and sculpted hood lines are designed to strengthen the overall dynamic form, which expresses the sense of commitment to the movement. For the sake of design and better aerodynamic side mirrors 2018-2019 Mazda 6 are located on the door panels, and the profile and rear end have a fairly balanced, nice looking proportions are amazingly visually alter the shape of the body, depending on the viewing angle. To face the car and a new color Soul Red, which emphasizes the dynamic image and the sedan adds to vivid emotions.

Interior of the new 2018-2019 Mazda 6

The car’s interior catches the eye and gives comfort. Designers skillfully combined with the ergonomics, aesthetics and functionality with harmonious forms, which added to the quality of finishing materials. The upper part of the panel and door trim is made of soft plastic. The 2018-2019 Mazda say that tactile sensations must necessarily be pleasant. The combination of black and white in the interior decoration of the new 2018-2019 Mazda 6 is complemented by metal edging and accents. Location gear lever and parking brake is optimized for easy management, and the instrument panel and the display on the center console arranged under the best possible vision.

Plenty of room in the cabin of the third-generation 2018-2019 Mazda 6 is ensured by the wheelbase, the length of which is an impressive 2830 mm. vehicle overhang has been shortened, which is where the wheels “have advanced” forward is particularly noticeable in relation to the front desk at 100 millimeters. The spaces in the passenger compartment than the previous model has increased, which increased the length of the rear seat cushions 2 centimeters and 37 millimeters of additional available space for the rear passengers’ feet.

For the front seats of 2018-2019 Mazda 6 allotted extra 20 millimeters of space in width, and for ease of loading luggage, opening the boot has increased by 32 millimeters. The driver can comfortably accommodate in the car because of all the necessary adjustment of the seat. The steering wheel can also be conveniently configured for themselves, both in height and in flight.

The efficiency SKYACTIV technology

SKYACTIV technology provides a new 2018-2019 Mazda in June good dynamics, handling and reliability. The rigidity of the body increased by 30 percent and reduced the drag coefficient to a mark of 0.26. When designing the car by Japanese engineers paid special attention to reducing fuel consumption, as exemplified by the SKYACTIV attachment for various components and body.

2018-2019 Mazda 6, except for the system stop / start with a better indicator of the time of re-starting the engine, among similar devices (0.35 seconds) is equipped with the installation of i-ELOOP. This capacitor system of regeneration of braking energy by which the power of electrical devices while driving, you remove the load on the engine and, as a result of reduced fuel consumption.

In a new generation of 2018-2019 Mazda 6 – two petrol motors

  1. SKYACTIV-G 2.0 – the first power unit has a working volume of 2.0 liters and has a high compression ratio of 14: 1. High torque available even at low engine speeds, the car provides a steady acceleration. The maximum amount of torque is 210 Nm is achieved at 4000 rpm and horsepower figure attain to the level of 150.
  2. SKYACTIV-G 2.5 – second power unit has a more interesting performance indicators, wherein the power for more than 190 horsepower with a torque of 256 Nm, which is more than 40 horses and almost 50 Nm greater than the smaller counterpart.

Engine 2018-2019 Mazda 6 2.0-liter manufacturer allows to complete both mechanical and automatic transmission, and for a more powerful power unit is only available automatic transmission and an energy recovery system i-ELOOP, than can not boast of a 150-horsepower engine. Gear CAT both attain to the level of six, and the “machine” is the owner of a familiar technology to reduce fuel consumption – SKYACTIV-Drive.

Security systems 2018-2019 Mazda in June

The list of the new sedan’s safety features can be identified adaptive lighting system that provides excellent visibility when driving in the dark. Lights 2018-2019 Mazda 6 follow the direction of the steering wheel and light the way to the side of the car. In addition, the new sedan boasts a special camera blind spot monitoring system that constantly monitors the position of the vehicle within the lanes and warns the driver about the dangers when changing lanes.

Another safety system to help prevent a collision in the city – is active at speeds up to 30 kilometers per hour, and will automatically stop the car in the event of obstacles to movement. Assistant Hill Launch Assist precaution will prevent roll back the new 2018-2019 Mazda 6 back at the beginning of the movement on the rise.

Photo 2018-2019 Mazda 6

Video of the new 2018-2019 Mazda in June